A wealth of 3D parts and more from Jason

balogh Tue May 26, 2020 3:39 pm

I am not sure how I have deserved it but Jason did an unparalleled and hard-to-return gesture to me: the postman delivered today a never-seen-before wealth of goodies from Jason that included 3D backplates for PeeWees (one even complete with the engine), several 3D Carl Goldberg mounts for red postage stamp 190-s, and 3D beam mount 049 reedy backplates of which one immediately had one of my Tarno carbs behind and my Lynx in front of it..
Several sets of engine mounting bolts and unobtainium-in-Hungary, US-thread round internal hex head prop screws completed the package..

A wealth of 3D parts and more from Jason 20200511

I tested the PeeWee with the 3D backplate as well as the Tarno carb on the beam mount. All I can say is they work superbly. The quality of the 3D items is just beautiful. Jason even printed my CEF name on the side of the PeeWee mounts...

A wealth of 3D parts and more from Jason 20200512

Jason I am embarrassed and cannot thank you this generosity enough...it opens up new ways of experimenting with these parts...

I hesitated whether I should write here about it for fears someone might find it bragging...but I thought I should share my joy with the CEF team and openly thank Jason for the presents he gave me..

**944_Jim** Tue May 26, 2020 5:40 pm

Yay for Balogh...
Hooray for Jason!

Some guys are just too good to be true...and we have a pile of them on this forum. All of you guys are the best!

dckrsn Tue May 26, 2020 6:02 pm

That is so cool Balogh, well deserved. And Jim, right back at ya.
Bob

Marleysky Tue May 26, 2020 7:38 pm

Yea! For Jason and Balogh! That’s just wonderful! That’s the way the world should be around us. Thanks for sharing the Joy!
I Love This Forum!

NEW222 Tue May 26, 2020 8:33 pm

Awesome there. I really like the personalization. Great job Jason!

fredvon4 Wed May 27, 2020 7:10 am

Just gotta love this site and all our members

Jason...that was an awesome gesture of international camaraderie Beer Cheers

.

getback Wed May 27, 2020 8:01 am

Way to Go Jason and this is the Best Forum by no doubt , Andrea that is a Nice haul and sure you will get alot of enjoyment out of experimenting. Small Cox Logo

balogh Wed May 27, 2020 8:20 am

Thanks to all of you for your kind reactions...yes this forum is very unique with members showing unrivaled generosity and cameradery to fellow members, often even without ever meeting each other..this is very rare in a materialistic world with individuals in general getting more and more suspicious, and selfish..at least this is my observation on my part of the world.

I wish I could return somehow all the physical and non-tangible presents that you, fellow members on his site have given to me.. This Site Rocks!

fredvon4 Wed May 27, 2020 8:37 am

Andras
The return is:
running an engine, flying a plane , writing, photos, history, exploits, vacations, dreams, wishes.....my country has a scant 230 +/- history...Hungry has well over 1000 years. Both countries good times and bad...the more we learn--- perhaps the more we can try not to relive the bad times

We all are better off for knowing our Global neighbors

I was fortunate to visit many countries ....most CEF have never left the USA

balogh Wed May 27, 2020 9:01 am

Thank you Fred..Hungary, albeit with more than 1000 years of history, is just a small spot on the face of Earth compared to e.g. the USA and I am glad if our humble historical and cultural resources are of some interest to other nationalities.

I have had the privilage to travel around the world and have been to many places I would love to return without any hesitation, and ANY state of the USA remain high on the list of my favorite destinations.. Very Happy

Jason_WI Thu May 28, 2020 12:43 am

Andràs

Thanks for getting more interest in the postage stamp mounts. I was finishing up a new order of PeeWee backplates for Bernie and asked him if he would include a few items for you when you ordered from him. They went to Canada first then to you.

Hopefully you can make use of the beam mount backplates. I’m still working on the design yet. They don’t quite fit in the firewall or tank mounts so I need to fix that.

I’ve been buying broken and busted up peewees on eBay and have been putting my 3D printed backplates on them. It only takes a few minutes to change the text on the side of the backplate and send to the printer.

Enjoy the parts. Thanks guys for the compliments.

**Admin** Thu May 28, 2020 12:50 am

Andras, that is awesome! Not a surprise to see that kind of generosity from Jason. I got a set of backplates and mounts from Jason a few weeks ago that I need to setup and run now that the weather is getting nice.

Looks like some hot little engines there!

1/2A Nut Thu May 28, 2020 12:53 am

Lovely gaggle of goodies!

Cox Pee Wee .020 with pressure tap - held good steady rpm
17,603 rpm / HQ 4x4.5 / 75 mph pitch speed
3.52 oz thrust / .045hp - 33w / 25% nitro
3D printed backplate / Cox HD Plug

Small Cox Logo

balogh Thu May 28, 2020 1:14 am

Jason_WI wrote:Andràs

Thanks for getting more interest in the postage stamp mounts. I was finishing up a new order of PeeWee backplates for Bernie and asked him if he would include a few items for you when you ordered from him. They went to Canada first then to you.

Hopefully you can make use of the beam mount backplates. I’m still working on the design yet. They don’t quite fit in the firewall or tank mounts so I need to fix that.

I’ve been buying broken and busted up peewees on eBay and have been putting my 3D printed backplates on them. It only takes a few minutes to change the text on the side of the backplate and send to the printer.

Enjoy the parts. Thanks guys for the compliments.

Jason,

thanks, I forgot to mention, and special thanks to Bernie for hosting your package in his envelop carrying my last order placed with him...the PeeWee you sent me may have come to you as a busted donor as you said, but it has as-new compression and perfect ball-joint fit, so that engine with your 3D backplate - having my name imprinted on it Smile

- is my special favorit.

Regarding the TeeDee 3D mount, I had to remove some material from the TeeDee stool on Bernie's COX engine bench before it sat firmly on its beams, that otherwise are in a perfect match with the stock TeeDee beam mounting holes. (Sorry I did not mount it in its place again for this photo, but with the mounting bolts removed from the bench, it will drop in place ...)

A wealth of 3D parts and more from Jason Td3dba10

Sponsored content

A wealth of 3D parts and more from Jason

A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason

Re: A wealth of 3D parts and more from Jason