free flight models

BMJR
http://www.bmjrmodels.com/
CAMPBELLS
http://www.campbellscustomkits.com/
AERODYNE
http://www.freeflightmodels.com/
PEARL
http://pearlfreeflight.com/Home_Page.html
TOP NOTCH
http://www.topnotchkits.com/index_files/TN_Kits.htm

You can buy Guillow's kits of the 400 series, made for free flight:

http://www.guillow.com/Series400Kits.aspx

Lieven

Having built serval over the years I'm not too pleased will Guillow's models.  The price may be "right" but there are other items lacking specifically the durability of the finished model powered by angine.

Made basically of "sticks and paper", the simply aren't rugged enough to hold up when in any way to the rigors of being roughly handled or surving all but the lightest "crashes".  This should concern "beginner" pilots.  (Yes you WILL crash guaranteed).  A slab-wing profile is far easier than a Guillow's

Better a "slab-wing" of profile design and there are whole bunch available at nominal prices at or lower than that of Guillows.

 EDIT:Try a Brodak "American Boy". Opps! That's not a free-flight.

 

SD

BMJR Models sells several classes of Free Flight Models.  I bought a Joe Wagner "Dakota" kit from them (via Ebay) and it is fantastic.  It is laser-cut with a complete plan sheet and covering tissue included.

http://www.bmjrmodels.com/

You might also try Swap-Meets if any are held in your area.  I got this Midwest "Sniffer", pre-built and flight-trimmed, with Trexler Tires and a Cox .020 for 40 bucks at a Swap Meet near St. Louis.





Hope this helps!

Also, Good Luck, and Welcome to the Forum !!!!!!

Kim

Edit:  Sorry...I missed stevej's listing of BMJR in his post !

I built one of these (Guillows Super Cub 24" span) in the 1970's powered with the Pee Wee 0.020. It flew like a bird!
I would use a 5 x 3 prop and about 0.4cc of fuel to get about a 30 second engine run.
The model was covered in a silk like nylon and Aerogloss dope. I would typically get between 6 and 10 flights before cracking the wing to fuselage joint. I would inject Ambroid into the broken section and be good to fly the next day.
I have since purchased the same kit, (now apparently laser cut) and hope to put a lightweight radio into it. I even found a Pee Wee with a factory installed exhaust throttle that I could use in a pinch.

Try old time models. Com I seen they have old complete kits from 1930 to about 1970s and its an acual store claiming kits have been checked for completeness and they mention some are free flite!

craig bernard wrote:Try old time models. Com   I seen they have old complete kits from 1930 to about 1970s and its an acual store claiming kits have been checked for completeness and they mention some are free flite!

What's the correct url for 'old time models'?
BMJR has a 20% off deal if you subscribe to the email newsletter.