Log in
Search
Latest topics
» Roddie's water-cooling bottle for bench-runningby getback Today at 12:19 pm
» Jim Walker Firebaby
by rsv1cox Today at 10:29 am
» Joe Wagners Sioux
by rdw777 Today at 9:55 am
» B-25 Mitchell
by rdw777 Today at 9:49 am
» Artwork for Otto Kuhni
by rsv1cox Today at 9:39 am
» Cox water wizard
by Wiggy Today at 6:32 am
» M1Fan...who are you?
by 944_Jim Yesterday at 10:07 pm
» My Cox .049 Marine inboard engine
by 1/2A Nut Yesterday at 9:52 pm
» Roddie's water-cooled bench-run vid
by roddie Yesterday at 8:55 pm
» Fox .35 Modifications
by Ken Cook Yesterday at 7:19 pm
» Cox AT-6 Texan repaint.....Pretty nice
by rsv1cox Yesterday at 6:25 pm
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Yesterday at 10:54 am
Simple Centering Tool for Fishing Line Hinges
Page 1 of 1
Simple Centering Tool for Fishing Line Hinges
Simple centering jig for fishing line hinges. I took a sturdy non flexible plastic lid. The top of lid is flat and about 1/16 ins thick. I draw a line at center and drill three holes with a 0.5 mm drill bit. Inserted two thumb tack and epoxied from inside. Inside of lid can also be filled with epoxy. Checked the center hole with a ruler. Jig is ready.
Last edited by Levent Suberk on Wed Sep 21, 2022 7:52 am; edited 1 time in total
Levent Suberk- Diamond Member
- Posts : 2205
Join date : 2017-12-24
Location : Türkiye
Levent Suberk- Diamond Member
- Posts : 2205
Join date : 2017-12-24
Location : Türkiye
Re: Simple Centering Tool for Fishing Line Hinges
Very nice job. As I've posted in different posts in the past, I am a fan of centering tools. This is about the neatest home brew tool yet.
The Off Center Mark
The Off Center Mark
batjac- Diamond Member
-
Posts : 2338
Join date : 2013-05-22
Age : 61
Location : Broken Arrow, OK, USA
Re: Simple Centering Tool for Fishing Line Hinges
Nice great and easy design. I remember waiting to hear back from or about another centering tool, but have unfortunately not heard back yet. I personally like the ease and simplicity of your design!
NEW222- Top Poster
- Posts : 3892
Join date : 2011-08-13
Age : 45
Location : oakbank, mb
Similar topics
» fishing line to use for control line
» Making a Simple Tool for Cox Engines
» Stitched Hinges, "Z" Hinges, and Other Old School / New School Tips
» A Quick and Dirty CA Hinge Installation
» spektrum DX5e, adjustable travel and centering.
» Making a Simple Tool for Cox Engines
» Stitched Hinges, "Z" Hinges, and Other Old School / New School Tips
» A Quick and Dirty CA Hinge Installation
» spektrum DX5e, adjustable travel and centering.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum