ok cub 049b

bullit132 Fri Aug 02, 2013 8:16 pm

hi, would anyone have any parts for an ok cub i could use a glow plug and a needle valve,also any one got a manual for it,i could really use some help,thanks alan,bullit132 Feedback Please

Mark Boesen Fri Aug 02, 2013 10:54 pm

if its a 'glowhead' you can use a Cox 'glowhead' if its a glowplug any 'hot', 'short' reach plug will work. You might press out the spray bar and use a Cox needle/spraybar from a '190' or '290' 'postage stamp' backplate, product engine.

The engine info sheet on starting and running isn't much different then any 1/2a,
open needle appx. 4 turns, use a 'fresh' 1.5v battery, etc.. Use a 5x3 or 5.5x3 prop. If compression is good you might have a good one, use lots of caster, at least 50% and total appx. 22-25%

ok cub 049b

ok cub 049b

Re: ok cub 049b