Log in
Search
Latest topics
» Wen Mac Aeromite/Challengerby rsv1cox Today at 6:38 pm
» The Beaver chainsaw, Cox's most interesting product
by rsv1cox Today at 5:22 pm
» What's the Best Reed for Cox Reed Valve Engines.
by Admin Today at 3:59 pm
» Consolidated half-A C/L Sonic Star
by GallopingGhostler Today at 12:31 pm
» Modelsmodels
by Coxfledgling Today at 1:33 am
» 010 head stops glowing
by balogh Today at 12:26 am
» WILLY NILLY
by MANDALAY Yesterday at 9:52 pm
» Stick built rubber powered Scientific ME-109
by TD ABUSER Yesterday at 4:07 pm
» Ignition Points for Ohlsson 23
by crankbndr Yesterday at 2:29 pm
» Needle-Valve extensions (yellow) for Killer Bee
by Cox International Wed Sep 18, 2024 10:35 pm
» Unique Foxie partzie. Potential fishing line/paper weight or something else.
by rsv1cox Wed Sep 18, 2024 2:48 pm
» Cox P-40 Clone Project - I just can’t leave well enough alone.
by akjgardner Wed Sep 18, 2024 10:32 am
Cox Engine of The Month
Babe Bee with small dia cyl & head
Page 1 of 1
Babe Bee with small dia cyl & head
http://www.ebay.com/itm/150724581003
I took it up to $10, $15 is not that bad. I'm 99.9% sure this is a consumer created engine. If you look closely at one of the pictures, you can see a small dent in the side of the crankcase making me wonder if this engine was in a crash where the piston and or cylinder was destroyed and replaced with whatever the modeler had in his flight box (the small dia. cylinder/head assembly). Great buy if you would like to have a working small dia head and a spare early cylinder or even use the engine as it is!
I took it up to $10, $15 is not that bad. I'm 99.9% sure this is a consumer created engine. If you look closely at one of the pictures, you can see a small dent in the side of the crankcase making me wonder if this engine was in a crash where the piston and or cylinder was destroyed and replaced with whatever the modeler had in his flight box (the small dia. cylinder/head assembly). Great buy if you would like to have a working small dia head and a spare early cylinder or even use the engine as it is!
Re: Babe Bee with small dia cyl & head
If it is still sitting at $15 in the last few minutes, I'll try to snatch it. The only issue I see now is the only reason this rough Babe Bee is up to $15 is because others obviously see the small diameter setup as well.
Re: Babe Bee with small dia cyl & head
Admin wrote:If it is still sitting at $15 in the last few minutes, I'll try to snatch it. The only issue I see now is the only reason this rough Babe Bee is up to $15 is because others obviously see the small diameter setup as well.
At then I will hold back then.
Re: Babe Bee with small dia cyl & head
nitroairplane wrote:Admin wrote:If it is still sitting at $15 in the last few minutes, I'll try to snatch it. The only issue I see now is the only reason this rough Babe Bee is up to $15 is because others obviously see the small diameter setup as well.
At then I will hold back then.
Do you want it? If you want it, I'll let you have it.
Re: Babe Bee with small dia cyl & head
No please you get it.
It would be my 5th engine in under a week.
It would be my 5th engine in under a week.
Similar topics
» SOLD! Cox Babe Bee with W head
» OK Cub head on early small thread Cox?
» Small diameter glow head adaptor
» Cox cylinder pre 1955 which fit small thread head
» Wanted: Head gasket for small thread 049
» OK Cub head on early small thread Cox?
» Small diameter glow head adaptor
» Cox cylinder pre 1955 which fit small thread head
» Wanted: Head gasket for small thread 049
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum