FOX FAI .049 Engines

Fox 049 glow heads now in stock - progress continues on the other parts. We are aiming to have complete engines come Spring with pricing for the 049 FAI in the $65 - $75 range.

http://www.exmodelengines.com/product.php?productid=18321&cat=284&page=1

[/quote]

Ken

I was glad to find the web address of Bob Matte written in your post.

I read on his website he also modifies COX TD09 glow heads to accommodate Nelson glow plugs. Do you now if Bob Matte is still active i.e. undertakes the said TD09 head modifications? (Just asking because he wrote on the page he had retired some 20 years ago so may be in his 80-s?…)

I sent him an email but so far have not heard from him. In which US state does he reside?

Thank you for the answer, Andras[/quote]

I finally contacted Bob and sent him a burnt 09 head that he modified for me for Nelson plug application. Beautiful job Bob, thanks again for the professional conversion and smooth business.
Come Spring and I will test fly my Sig Wonder powered by an RC TD09 now with the Nelson hot plug that I expect will allow a low idle:

Andras, I would think you might get a possible rpm gain as well. That's good to know that he does this service. I own 2 TD .09's and I only have a limited amount of plugs. Ken

Yes Ken certainly the Nelson plug will help keep the compression ratio higher than normal plugs that allow compressed gases fill the space around the thread. Do you think even the rpm with regular COX head will be surpassed?

I only see .049 glow heads on the site and prop driers that are sold out. Is there more items or was that all?

Cribbs74 wrote:I only see .049 glow heads on the site and prop driers that are sold out. Is there more items or was that all?

Glow heads were recently finished and are currently the only available item. The prop drivers should be available this weekend or early next (just need to take pictures). Cylinder/Piston for FAI are in the final stages of machining and then the pistons will need assembly with connecting rod.

Matt

What style of .049 Fox engines are you aiming at ?

getback wrote:What style of .049 Fox engines are you aiming at ?

Primarily the .049 FAI since this is what we have parts for (not much for standard 049). While some are interchangeable (glow head, piston, tank, gaskets, etc.) the majority are not. The goal will be to build as many of the FAI .049 as is available with the remaining inventory we purchased. Below is a rough list of what will be available.

FAI
Complete Engines with Fuel Tank Assembly (Targeting $65 - $75 Retail at this time)
Glow Heads (will also manufacture a glow head adapter at some point)
Cylinder/Piston (limited to excess of build-able engines)
Crankshaft
Spinner Nut
Driveplate
Gaskets (Glow Head / Tank to crankcase)
Screws

Regular 049
Glow Heads (will also manufacture a glow head adapter at some point)
Cylinder/Piston (have a couple hundred standard cylinders, but no ETA of finishing them at this point. Have a handful that are complete.)
Driveplate
Gaskets (Glow Head / Tank to crankcase)
Screws

I think i have one or had one , would have to look . Thanks Matt

Wanted to provide an update on the progress of this project. After many issues with the assembly and completion of unfinished parts we are currently assembling pistons and connecting rods and are aiming for final assembly soon. Spare parts will be available for sale where they are in excess of build-able engines.

Parts should start to be available in the coming week with final, assembled engines ready for sale in mid-January.

Matt

Cool !! Question : have you ran one of these engines and how did it perform if so .

getback wrote:Cool !! Question : have you ran one of these engines and how did it perform if so .

Yes, I ran a couple before the remaining parts were purchased and they ran well. I would suggest the MAN article for a thorough review (about halfway down page one of this thread).

Matt

Is there a price yet for a running engine? Any wait list?

fredvon4 wrote:Is there a price yet for a running engine?  Any wait list?

$70-$75 will be the price for the engines.

Wait list is available. If interested please send an email to sales@exmodelengines.com to be added.

Engines and some parts are now available!

http://www.exmodelengines.com/fox-engines-parts/

Cylinders/Pistons for the FAI are forthcoming as well as some other odds and ends, but need to be properly stocked.

Matt