Log in
Search
Latest topics
» Fun Times Keeping Busy With Lead.....by getback Today at 9:44 am
» Feed Station Zebra.. Spring 2024
by roddie Yesterday at 9:30 pm
» Willy Nillie's Shoestring micro racer powered by COX TeeDee010
by balogh Yesterday at 6:17 pm
» You know you’re in Branson, Missouri when
by GallopingGhostler Yesterday at 4:12 pm
» I need to go back to RC school..
by cstatman Yesterday at 2:41 pm
» Cox Thimble Drome Special & Champion info please Or Is there a time line?
by Myk Mon May 27, 2024 11:26 pm
» Scientific Gulfhawk
by roddie Mon May 27, 2024 9:59 pm
» Memorial Day 2024
by roddie Mon May 27, 2024 9:48 pm
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Mon May 27, 2024 6:31 pm
» Does this book interest anyone?
by rdw777 Sun May 26, 2024 3:58 pm
» tap.. tap.. tap.. tap.. tap.. tap.. (reset)
by batjac Sun May 26, 2024 10:57 am
» Sold out Cox .049 silencers for sale
by sosam117 Sun May 26, 2024 7:16 am
Cleaning Gummed Cox Engines
Page 1 of 1
Cleaning Gummed Cox Engines
I have heard of many ways to degum and clean seized cox engines after storage. Alcohol, denatur alcohol, boiling, anti freeze etc. what is the best and most effective way to degum and clean a cox engine?
Thanks
darren
Thanks
darren
Darren19- Guest
Re: Cleaning Gummed Cox Engines
There are many ways to clean engines and most work great, its a matter of personal preference and whats on hand. I'd suggest not soaking engines for extended lengths in brake fluid or alcohol as those absorb moisture and may cause corrosion.
Re: Cleaning Gummed Cox Engines
A through soaking in Hoppe's #9 Gun Cleaning Solvent and the application of mild heat has worked well for me.
Essential is allowing time for the solvent to work rather than rush the operation.
Also using the appropriate Cox wrench and properly fitting screwdrivers is recommended. (See the "search" function because this has been discussed here many times.) Go to: Cleaning)
DON"T USE PLIERS TO REMOVE ANYTHING ON COX or you'll damage parts.
SD
Essential is allowing time for the solvent to work rather than rush the operation.
Also using the appropriate Cox wrench and properly fitting screwdrivers is recommended. (See the "search" function because this has been discussed here many times.) Go to: Cleaning)
DON"T USE PLIERS TO REMOVE ANYTHING ON COX or you'll damage parts.
SD
SuperDave- Rest In Peace
- Posts : 3552
Join date : 2011-08-13
Location : Washington (state)
Re: Cleaning Gummed Cox Engines
Here are some tips for cleaning.
For removing dried up Castro oil and fuel and cleaning the inside of the cylinder and other internal parts any 15% nitro fuel or better and a good stiff toothbrush or a Q-Tip works. I buy medical or dental grade because they are stiffer and don't fall apart that easily.
If you take a bright flashlight you can shine it down the needle valve opening on a radial back plate and look through the venturi to check for clogging. A sewing needle works great for clearing it. Glow heads tops can be cleaned by chucking one up in a Dremel and using 320B waterproof sandpaper or something similar.
For polishing the silver colored parts Mother's Mag and Aluminum Cleaner is the hot ticket. For back plates I use Wight's Copper Cream and a Q-Tip.
For removing dried up Castro oil and fuel and cleaning the inside of the cylinder and other internal parts any 15% nitro fuel or better and a good stiff toothbrush or a Q-Tip works. I buy medical or dental grade because they are stiffer and don't fall apart that easily.
If you take a bright flashlight you can shine it down the needle valve opening on a radial back plate and look through the venturi to check for clogging. A sewing needle works great for clearing it. Glow heads tops can be cleaned by chucking one up in a Dremel and using 320B waterproof sandpaper or something similar.
For polishing the silver colored parts Mother's Mag and Aluminum Cleaner is the hot ticket. For back plates I use Wight's Copper Cream and a Q-Tip.
jsesere- Rest In Peace
- Posts : 1606
Join date : 2010-09-05
Location : Salem Oregon
Similar topics
» Gummed up engines
» Regular Engine Clean
» Add a "Cleaning Engines" Sticky
» Cleaning tip for tanked Cox engines
» Cleaning gunked up U/C engines
» Regular Engine Clean
» Add a "Cleaning Engines" Sticky
» Cleaning tip for tanked Cox engines
» Cleaning gunked up U/C engines
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum