Customer submissions page

Very cool but what is the Oliver tiger twin doing in the bottom left?
We're they secretly cox?
Lol
But very cool Bernie!

nitroairplane wrote:Very cool but what is the Oliver tiger twin doing in the bottom left?
We're they secretly cox?
Lol
But very cool Bernie!

Are you sure it's an "Oliver"? I thought I got the pic from CS engines; who make some parts for us.

Hey Bernie, send out a submission email and see if the guy who built the .049's cat carousel will send something back.

That would be too funny!

Cox International wrote:That would be too funny!

Ohh, the curiosity is killing me on that one. Ya gotta do that. lol.

Cox International wrote:

nitroairplane wrote:Very cool but what is the Oliver tiger twin doing in the bottom left?
We're they secretly cox?
Lol
But very cool Bernie!

Are you sure it's an "Oliver"? I thought I got the pic from CS engines; who make some parts for us.

CS make Olie Tiger replicas.
Yup it is the
"CS OT twin 30"
OT stands for 'oliver tiger'

Hi Bernie,
I have a submission but for some reason, I wasn't able to upload it to the e-mail I was sending to you.
Anyway, It's a GeeBee u/c that I scratch built. I rebuilt the Golden Bee using a Tee Dee Piston, Cylinder and a tank rebuild kit that I got from you. I have not had a chance to tach it yet, but it screams!! I'm running a 6x3 Windsor prop on 25% Glow Plug Boy 1/2a fuel. I just need to run the lead out lines and it will be ready to fly.

Shawn

Thanks Shawn, I just clipped the pic from here.

Cool Thanks.

sdjjadk wrote:Cool Thanks.

Added your model and re-did the whole page to make it look nicer.

http://coxengines.ca/customer-submissions.html

Cox International wrote:

sdjjadk wrote:Cool Thanks.

Added your model and re-did the whole page to make it look nicer.

http://coxengines.ca/customer-submissions.html

That looks very slick,,very nice.

Here is my plane -

sdjjadk wrote:

Hi Bernie,
I have a submission but for some reason, I wasn't able to upload it to the e-mail I was sending to you.
Anyway, It's a GeeBee u/c that I scratch built. I rebuilt the Golden Bee using a Tee Dee Piston, Cylinder and a tank rebuild kit that I got from you. I have not had a chance to tach it yet, but it screams!! I'm running a 6x3 Windsor prop on 25% Glow Plug Boy 1/2a fuel. I just need to run the lead out lines and it will be ready to fly.

Shawn

Hey Shawn, do have plans for that plane?

Hey Bernie, would my little 16.5" guillows spitfire .010 powered conversion qualify?

cribbs74 wrote:Hey Bernie, would my little 16.5" guillows spitfire .010 powered conversion qualify?

If Iron Man riding .020 Bipe landing gear qualifies...

microflitedude wrote:

cribbs74 wrote:Hey Bernie, would my little 16.5" guillows spitfire .010 powered conversion qualify?

If Iron Man riding .020 Bipe landing gear qualifies...

True Matt! However, I think he was looking for the unusual and Iron man definitely fits that bill..........

My guillows Spit looks tame in comparison

cribbs74 wrote:Hey Bernie, would my little 16.5" guillows spitfire .010 powered conversion qualify?

Wappen to the Spit Ron?
Did it maiden yet?

John Goddard wrote:

cribbs74 wrote:Hey Bernie, would my little 16.5" guillows spitfire .010 powered conversion qualify?

Wappen to the Spit Ron?
Did it maiden yet?

Ashamed to admit but, nope! My friend that was going to buddy tether with me had all his radio gear and heli's stolen out of his car. $3000 worth of RC stuff gone.

So, when I get to Oklahoma I plan on finding another helpful RCer to guide the maiden. So for me it's back to my little high wing flyzone until I can make that happen!

Wanna fly to Oklahoma John Boy? Free room and board!

microflitedude wrote:
Hey Shawn, do have plans for that plane?

Here you go.

http://www.starcadplans.net/index.php/downloads/cat_view/68-pdf-designs/73-control-line/88-control-line-sport.html?limit=5&order=name&dir=DESC&start=25

It's the first one down on the page. It's a small PDF and I didn't have a way of enlarging and printing in one sheet, so I just enlarged it and I had to print it out in tiles. I taped the tiles together, cut them out and transferred them to 1/8" x 6" wide balsa sheets so I wouldn't have to edge glue (2) 3" wide sheets together. I also made the wing chord wider for better stability. It was a simple build and was easily covered in MonoKote. The scallops however, were free handed onto scrap balsa and then used a template for cutting out the MonoKote.


Shawn

Thanks!

microflitedude wrote:Thanks!

U R Welcome.
Post some pics of the build.

man i like the 5 cylinder orange raidial engine
http://coxengines.ca/submissions/E5.jpg
i wanna build that one when i get into cnc machining class next year, by the way who made this one and does it run?

mitchg95 wrote:man i like the 5 cylinder orange raidial engine
http://coxengines.ca/submissions/E5.jpg
i wanna build that one when i get into cnc machining class next year, by the way who made this one and does it run?

Your class better be a good one, as building radial engines is no easy task.