Re: [Wanted] Following Cox Engine Manuals to list on my site.

**Admin** Sun Nov 13, 2011 3:02 pm

warrenlead wrote:I just sent a copy of the Queen Bee instructions. Also I found a pic of my NFFS Medallion .051 It didn't come with any instructions except the President of the NFFS at the time "Bob Beecroft" included a note with each engine before he sent them out. See photo.

Thanks for the Queen Bee Manual, I'll get it listed in a little while. I'll let you know when I do. Thank you. Yeah, I didn't know if they included a regular Medallion manual, a special manual or no manual at all. I thought I would ask for the manual in case there is one, I'll remove it from my wanted list.

Thank you, Jacob

**Admin** Fri Nov 18, 2011 12:20 am

Alright, I have listed all the manuals that were sent to me (with the exception of redbaronbpe "JM Rojo Collection" manuals) I just didn't get around to them yet. I am still in need of all the manuals listed on the first post! Thank You!

mr_cox Fri Nov 18, 2011 3:17 am

Will scan the manuals this weekend.

Cox International Sun Nov 20, 2011 10:36 am

Am I correct in the assumption that you are still looking for the following manuals? The one's in bold I could send you if you still need them. I might have a few more at the office but would have to check on Monday.

Bernie
www.coxinternational.ca

QRC .049
QZ .049 (If any instruction sheet was available)'
Banana .049
Dragonfly .049
Super Bee .049
Space Bug Jr.
Space Bug
Strato Bug
Space Hopper
Thermal Hopper
RR-1 .049
Golden Bee (sheet, if ever available)
Texaco Jr. .049
RC Bee .049
TD .09
Special .15
Special .15 MkII
Sportsman .15

Cox International Sun Nov 20, 2011 10:39 am

For some reason the bold does not show but they are:

QRC
Banana
Dragonfly
TD 09

**Admin** Sun Nov 20, 2011 11:23 am

Cox International wrote:For some reason the bold does not show but they are:

QRC
Banana
Dragonfly
TD 09

Bold? I was crossing them off like ~~this~~.

I have made the ones I have already gotten ~~red~~

The ones I crossed off are the ones I have gotten. I still need the ones that are not crossed off.

Cox International Sun Nov 20, 2011 12:38 pm

No, what I meant is that I copied the list of the ones that were not crossed off into my post and tried to bold the ones I could supply. The bold does not seem to show on the post.

Anyhow, I'll get you the ones I have and you still need.

Bernie

**Admin** Sun Nov 20, 2011 12:44 pm

Cox International wrote:No, what I meant is that I copied the list of the ones that were not crossed off into my post and tried to bold the ones I could supply. The bold does not seem to show on the post.

Anyhow, I'll get you the ones I have and you still need.

Bernie

Oh! Yeah, sometimes the letters are just bold already. Thank you! Any manuals will help!

Cox International Sun Nov 20, 2011 12:51 pm

Banana is at the office (Monday project) and I'll check what else I have there. Below the 3 that I have at home. Just click to DL as PDF:

Bernie

www.coxengines.ca/QRC.pdf

www.coxengines.ca/Dragonfly.pdf

www.coxengines.ca/TD09.pdf

**Admin** Sun Nov 20, 2011 1:02 pm

Thank you! I'll add those as soon as I can!

Cox International Mon Nov 21, 2011 12:36 pm

Here is the RR1

www.coxengines.ca/RR1.pdf

Cox International Mon Nov 21, 2011 12:42 pm

And here the Banana one

www.coxengines.ca/Banana.pdf

Do you need the Conquest 15 one?

Bernie
www.coxinternational.ca

mr_cox Mon Nov 21, 2011 3:26 pm

Hello All!

Here is the Texaco + JR manual: (it misses a little corner)

http://www.coxengines.eu/misc/Cox_Texaco_normal_and_JR.pdf

Saw that Bernie posted the other manuals already.

**Admin** Mon Nov 21, 2011 3:39 pm

mr_cox wrote:Hello All!

Here is the Texaco + JR manual: (it misses a little corner)

http://www.coxengines.eu/misc/Cox_Texaco_normal_and_JR.pdf

Saw that Bernie posted the other manuals already.

Thank you! The corner is not a big deal. Do you want me to call you mr_cox or something else on the manual list?

Cox International wrote:And here the Banana one

www.coxengines.ca/Banana.pdf

Do you need the Conquest 15 one?

Bernie
www.coxinternational.ca

Thank You! I did get a Conquest .15 manual from J.M. Rojo but if it is different from the one on the list (different looking, whatever) then I would take it!

I'll add all these manuals in a moment!

mr_cox Mon Nov 21, 2011 3:45 pm

I could also send you a scan from the back of a Golden Bee box, there is a small manual written on it. I also noticed you do not have a manual of a Medallion .049/.09 with throttle and muffler on your website. Do you want me to scan those as well? (will be tommorow)

Could you call me Bastiaan from www.coxengines.eu (website is under development) on the list?

Best regards Bastiaan

**Admin** Mon Nov 21, 2011 3:51 pm

mr_cox wrote:I could also send you a scan from the back of a Golden Bee box, there is a small manual written on it. I also noticed you do not have a manual of a Medallion .049/.09 with throttle and muffler on your website. Do you want me to scan those as well? (will be tommorow)

Could you call me Bastiaan from coxengines.eu (website is under development) on the list?

Best regards Bastiaan

Sure I'll call you Bastiaan and will also list your website. I'll take the Medallion manual whenever you get it. I have a scan from the back of my golden bee box already but if yours is different from mine, then I will take it.

Take a look at my manual list, http://sites.google.com/site/coxenginecollection/instruction-sheets If I'm missing anything from that list or from my wanted list, I would gladly take it!

Thank you! -Jacob

mr_cox Mon Nov 21, 2011 3:56 pm

Hello Jacob,

I think my Golden Bee it is the same, I missed that one on your site.

Will scan the medallion manual tomorrow.

mr_cox Tue Nov 22, 2011 11:39 am

Here is the other manual:

http://www.coxengines.eu/misc/Cox_Medallion.049and.09_with_throttlemuffler.pdf

**Admin** Tue Nov 22, 2011 5:56 pm

mr_cox wrote:Here is the other manual:

http://www.coxengines.eu/misc/Cox_Medallion.049and.09_with_throttlemuffler.pdf

Thank you! I'll get it listed right now!

Cox International Thu Dec 01, 2011 3:01 pm

The RR-1 manual I sent you did not work for you? I noticed that you were still looking for one.

Bernie

**Admin** Thu Dec 01, 2011 7:19 pm

Cox International wrote:The RR-1 manual I sent you did not work for you? I noticed that you were still looking for one.

Bernie

Did you send me a RR-1 Manual? Dammit Gmail! It must have not went through, for some reason, it just doesn't like your emails! When did you send it?

I am really thinking about creating a Comcast email account (I can have one at no extra cost since I have their internet and cable tv. I just like the Gmail features!

Cox International Thu Dec 01, 2011 8:41 pm

LOL

See my post from Nov. 21 with the link to the manual.

Bernie
www.coxinternational.ca

**Admin** Thu Dec 01, 2011 10:20 pm

How I missed your RR-1 post, I have no idea! I may have looked at it on my phone and since I don't like to download stuff to my phone, I probably just forgot about it. Thanks for the manual and thanks for reminding me!

PS: You should take one of your new tanks and throw it onto a lathe, put some ribs on it and then drop the cross-vent tubes in it. Anodize it a neat color! Then package it up as a regular tank kit would be and auction it off on eBay (or give it to me)! You could probably get a good amount of money for it! Actually, how are the stunt tanks coming along?

Thanks, Jacob

Cox International Fri Dec 02, 2011 11:50 am

Jabob,

We do not have a lathe, let alone me knowing how to operate one lol. I am a marketing person and I leave the "real" work to machine shops.

The 8cc alu tanks were recently shipped and we should have them in aprx 2 weeks, at which point we will be offering non-stunt versions in silver.

A few days after that we will offer silver stunt versions and matching backplates, followed by coloured tanks a couple of weeks later.

Bernie
www.coxinternational.ca

**Admin** Sun Dec 04, 2011 2:21 am

Admin wrote:Hello,
I am in need of the following manuals to post on my site. I am only after scans, not the physical manual. You will be given credit on the page alongside the download. Some of the manuals I already have listed on there are from Martin Hepperle's site and I have been having trouble contacting him so I am now looking for replacements for those manuals. I don't care if they are poor scans or practically remakes. Here is the page they will be posted on, https://sites.google.com/site/coxenginecollection/instruction-sheets

I could use the following.

~~Tee Dee .020~~ Thanks to nitroairplane
~~QRC .049~~ Thanks to Bernie
QZ .049 (If any instruction sheet was available)'
~~Banana .049~~ Thanks to Bernie
~~Dragonfly .049~~ Thanks to Bernie
Super Bee .049
Space Bug Jr.
Space Bug
Strato Bug
Space Hopper
Thermal Hopper
~~Olympic .15~~ Thanks to J.M. Rojo
~~RR-1 .049~~ Thanks to Bernie
Golden Bee (sheet, if ever available)
~~Texaco .049~~ Thanks to Matt from Ex Model Engines
~~Texaco Jr. .049~~ Thanks to Bastiaan
RC Bee .049
~~Queen Bee .074~~ Thanks to Warren
~~TD .09~~ Thanks to Bernie
Special .15
Special .15 MkII
Sportsman .15
~~Conquest .15~~ Thanks to J.M. Rojo

And any other instruction sheets I may have missed....

A better quality copy of the Sure Start manual, the one I have works but is poor quality.

This is a lot of different manuals I'm after!

nitroengine[at]gmail[dot]com

Thank You, Jacob

I'm still in need of these manuals if anyone has them!

Sponsored content