New r / c model airplane project for Cox!

Very Nice !! Love the colors , not far from air time now

Wow that surly looks great Mauricio. A very simple yet very nice looking color scheme.

Thank you friends for your comments!....
Here is the engine test.
Cox Tee Dee .051 r/c

Sounds Good and Ready to go in the air . Nice throttle response !

Dear friends, here I share the flight video of the SCAMP model aircraft with Cox Tee Dee .051 r/c engine...beautiful trainer with very good and fast response to your commands. 1/2A, beautiful category to enjoy.
This video is dedicated to the Memory of my Great Friend: ROBERTO ISHKANIAN, whom I remember permanently.

Excellent, Mauricio,

I like those low passes with the stable low engine rpm, exactly as a trainer plane is supposed to run..

Oh Man that plane flies Great nice and stable even at low speeds . I am sure your friend is looking down on you and saying anther great model you have built and Love as a friend for doing it for Me . It that a TD ?

getback wrote:Oh Man that plane flies Great nice and stable even at low speeds . I am sure your friend is looking down on you and saying anther great model you have built and Love as a friend for doing it for Me .   It that  a TD ?

Hello dear Eric, how are you?...Yes it is a Tee Dee .051 r/c...thanks for your comment.
I recently placed a Golden Bee, here the video...

RURAL ROADS
Some time ago I started cycling on rural roads in the countryside near our city. Those roads are full of nature, their simplicity and nostalgia is wonderful, seeing a sunset there, personally makes me thank life over and over again to be able to enjoy that, so simple and so beautiful at the same time, enjoy nature. For this reason I wanted to relate my SCAMP model to those places and thus link a beautiful moment that is recorded there.
I hope you enjoy this simple video, but it connects directly with nature itself.

Excellent flight, and landing on that narrow road, Mauricio..

Nature flight ,nice and flat ground out there . Your skills in RC are remarkable in those tight spaces Good Fun !! Thank You ! (( I am doing OK been working on the garden for this year , getting the land ready and putting some plants in the ground))

Very nice, accurate flying as well.
The video flight above, is that 049 powered ?
Throttle response seems very good, a throttled intake or exhaust throttled, maybe both ?

Nice spot of wilderness to fly it in also.

Coxfledgling wrote:Very nice, accurate flying as well. The video flight above, is that 049 powered ? Throttle response seems very good, a throttled intake or exhaust throttled, maybe both ? Nice spot of wilderness to fly it in also.

I downloaded then enlarged Mauricio's photo of the Scamp so I could see engine details. His Golden Bee is using an exhaust throttle ring for engine control. I have used these, they work very well on an engine that has SPI (sub-port induction - the air gap below piston skirt seen through the exhaust port with engine at top dead center. It allows an additional puff of air to boost the fuel air charge for additional power).

http://www.exmodelengines.com/product.php?productid=17629


or

https://coxengines.ca/top-end/throttle-ring-for-cox-049-engine.html


Both are excellent. Bernie's (Cox Engines Canada) has an added advantage in that the Circlip Ring used to connect throttle linkage to can be relocated from its shown lower position to the slot above the exhaust cut out for more flexibility depending on your situation.

One that I have is an older one from the 1970's from Ace R/C, which resembles Matt's (Ex Model Engines). I had a blast during the late 1970's flying my Q-Tee on Rudder Only with auxiliary throttle on my Golden Bee like Mauricio's.

There is a caveat with these rings. Certain year cylinders may not work if their outer diameter does not smoothly fit the ring's inner diameter, because Cox made changes to the cylinders several times. Ace used to sell two with different inner diameters depending on what cylinder one had.

MauricioB wrote:in this way, the model can share different engines.
as I mentioned at the beginning, the idea is to enjoy several engines in action!

Tee Dee .049/.051
Medallion .049/.051
Babe Bee, Black Widow, Golden Bee .049
Surestar, Killer Bee, etc., etc...
     

Beautiful work!!!!! Many compliments!

balogh wrote:Excellent flight, and landing on that narrow road, Mauricio..

thank you very much András, it really is beautiful to fly there... soon I will go for more adventures...

getback wrote:Nature flight ,nice and flat ground out there . Your skills in RC are remarkable in those tight spaces Good Fun !! Thank You ! (( I am doing OK been working on the garden for this year , getting the land ready and putting some plants in the ground))

Hello my dear friend, I am very happy to hear from you and that you are well, how good you are trying in the yard... thank you very much for your comment, prepare a runway maybe I will fly in your yard as part of the adventures too!!! ha ha ha

Coxfledgling wrote:Very nice, accurate flying as well.
The video flight above, is that 049 powered ?
Throttle response seems very good, a throttled intake or exhaust throttled, maybe both ?

Nice spot of wilderness to fly it in also.

Hello, thank you very much for your comment, yes, as GallopingGhostler mentions there in his excellent explanation, it is a restriction ring, it works perfectly!

[quote="Miki60"]

MauricioB wrote:in this way, the model can share different engines.
as I mentioned at the beginning, the idea is to enjoy several engines in action!
Beautiful work!!!!! Many compliments!

thank you very much friend!

Very nice Mauricio!! I’ve enjoyed your clean builds and excellent flight videos Perfecto, Gracias!!

Robert

The SCAMP model aircraft has flown over the lagoon with 45 km/h of wind!...beautiful!!!, soon I will share a video!

https://www.coxengineforum.com/t16246-happy-belated-birthday-mauricio#210341

rdw777 wrote:Very nice Mauricio!! I’ve enjoyed your clean builds and excellent flight videos Perfecto, Gracias!!

Robert

Thank you for your comment friend, they are very appreciated by me!

1/2A Nut wrote:https://www.coxengineforum.com/t16246-happy-belated-birthday-mauricio#210341

oh My great friend Brad!...I hadn't seen that post, thanks for sharing it and letting me know!!...there I leave my thanks to all of you!!